With this case study we will observe a customized solution requested by an Italian company in the foundry sector, which for years has been developing and manufacturing a very wide range of steel and titanium products for various fields of application.
Before our intervention
The old filter, despite occupying a larger surface, was too articulated and undersized. Furthermore, stack emissions did not comply with the regulations in force.
After our intervention
- Improvement of the working environment
- Compliance with the limits relating to stack emissions
- More performing sizing, reducing the overall dimensions of the entire system
- Reduction of management and maintenance costs
technical Features of the HJL Cart
The HJL CART cartridge filter is suited for working with medium-high dust loads.
HJL –C-4o-260-15 Dati tecnici Airflow
16.000 m3/h
Pressure drop in operation
mBar
Total filtering surface
260 m2
Quantity and lenght of the sleeves
n° 165 / h. 4.000 mm.
Filtration velocity
1,03 m/min
Filtering media
Polyester 550g/m2
Dry and de-oiled compressed air consumption
40 Nm3/h
N° electrovalves
15 da Ø 1”
Prechamber
yes
Outlet dust concentration
≤ 5 mg/m3
Exhaust system
Screw conveyor + rotary valve
technical Features of the PC-Cyclone
Pre-separator for sparks and coarse heavy dust.
PC-CYCLONE1300#Special
Technical data
Airflow
16.000 m³/h
Diametre
Ø 1.300mm
Thickness
Increased
Pressure drop
130-95 [mm H2O]
Exhaust system
Rotary valve